Coming along

So got a bit done in the last couple of days! The rear cab distributor is in (for some reason I havent' taken a photo of it yet.. will get one soon!), i have it connected to the power feed from the front, have an earth line from it to go to one of the rear seat mounting bolts, and also have pos and earth lines to run to the ute back. I also selastic'd up that annoying whistle in the roof, though got a surprise while doing it!

So got a bit done in the last couple of days! The rear cab distributor is in (for some reason I havent' taken a photo of it yet.. will get one soon!), i have it connected to the power feed from the front, have an earth line from it to go to one of the rear seat mounting bolts, and also have pos and earth lines to run to the ute back. I also selastic'd up that annoying whistle in the roof, though got a surprise while doing it!

The bit causing the whistle - I thought it was just a small hole..

No probs, I'll just prise it up, fill it with silicone, and put it back on.. Hmm, must fix up those scratches sometime too. Now look wha I found when I removed that bit!

Yep, I was sure surprised! oh well, selastic to the max on the bit I'd removed, and put it back on, and it's all good - no more whistle! I also got the antenna cables (5 of) run from the front grille, to the rear of the cab.. Photo below shows both the power feed, and the 5 antenna cables (plus one cat-5 cable to go to the ute back for remote switching of things) in their respective protective spiral tubing:

And then an actual shot of the lines into and out of the rear cab, and into the ute tray:

And a shot of the ute tray.. That's supposedly 'royal blue' methinks the colour code matching book at supercheap is wrong...